Table of Contents
Advertisement
WARNING
Petroleum and its vapours are highly flammable
and explosive. Exercise extreme caution when
handling fuel.
FUEL AND REFUELING
HANDLING FUEL SAFELY
■ Always handle fuel with care, it is highly flammable.
■ Always refuel outdoors where there are no sparks and
flames. Do not inhale fuel vapours.
■ Do not let petrol or oil come in contact with your skin.
■ Keep petrol and oil away from the eyes. If petrol
or oil comes in contact with the eyes, wash them
immediately with clean water. If irritation is still
present, see a doctor immediately.
■ Clean up spilled petrol immediately. Always mix,
transport and store fuel in a container approved for
petrol.
FILLING THE TANK
WARNING
Check for fuel leaks. If any are found, correct
them before use to prevent fire or burn injury.
■ C l e a n s u r f a c e a r o u n d f u e l c a p t o p r e v e n t
contamination.
■ Loosen fuel cap slowly to release pressure and to
keep fuel from escaping around the cap.
■ Carefully pour fuel mixture into the tank. Avoid
spillage.
■ Prior to replacing the fuel cap, clean and inspect the
gasket.
■ Immediately replace fuel cap and hand tighten. Wipe
up any fuel spillage. Move 9 m away from refuelling
site before starting engine.
WARNING
Always shut off engine before fuelling. Never add
fuel to a machine with a running or hot engine.
Move at least 9 m from refuelling site before
starting engine. Do not smoke!
■ The bump head must not rotate when the engine
is idling. Do not use the product until the problem
is repaired. Return to approved service centre for
assistance if necessary.
■ Debris when hit by the bump head can become
thrown objects and may travel significant distances.
Remove all debris from the work area before
operating. Keep bystanders (especially children) away
from the working area by 15 m.
ENGLISH (Original Instructions)
3
DESCRIPTION
1. Attachment shaft
2. Bump head
3. String guard
4. Gear head
5. Hanger cap
6. Knob
7. Coupler
8. Guide recess
9. Positioning hole
10. Direction of cutter rotation
11. Best cutting area
12. Spanner
13. Button
14 Second hole
15. J-handle
16. J-handle clamp assistance
17. Shoulder strap
18. Strap hanger
19. Grass deflector
20. Bump head
21. Drive connector
22. Mounting plates
23. Screws
24. Mounting bracket
Advertisement
Table of Contents
