Step 2.
Switch to Boot page, use the Up and Down key to select "Hard Drive BBS Priorities" and press Enter key.
Step 3.
Select "Boot Option#1" and press Enter key to configure the setting. Use the Up and Down key to select the
name of the USB flash disk, then press Enter key. The actual USB disk name depends on the model type you use, while
the one shown in the following figure is for demonstration.
C h a p t e r 4 I n s t a l l a t i o n o f t h e O p e r a t i n g S ys t e m
4_
4 - 5