Advertisement
STEP
CORD MANAGEMENT
LifeWorkEtc.com
800-634-9514
Part # 3330331, Rev. A
04
Remove the cord management
covers and run the monitor cords
through the channel.
P
Make sure
Please check and tighten all screws every two months to ensure proper use. This product was
designed to be installed on a desk. Before installing, make sure the mount will support the
combined load of the equipment and hardware. Never exceed the maximum load capacity of 9KG,
or else it may result in the failure of the product or personal injury.
This
LIZANNE (DUAL) ASSEMBLY
Adjust the monitor's height after
installing. Using the 5x5 Allen key
adjust the screw in the "-"
Counterclockwise direction to
move Down and in the "+" Clockwise
direction to move Up.
Replace the cable cover
to hold the cord in place.
S
N
Insert the bottom
part, then lock the
cover.
Advertisement
