Table of Contents
Advertisement
Reshipment
Instructions
Option 01
Installation
Module
Installation
Installation Instructions 2-2
1. Use the original packing when returning the switching module
to EADS North America Defense Test and Services, Inc. for
calibration or servicing. The original shipping carton and the
instrument's plastic foam will provide the necessary support for
safe reshipment.
2. If the original packing material is unavailable, wrap the
switching module in an ESD Shielding bag and use plastic
spray foam to surround and protect the instrument.
3. Reship in either the original or a new shipping carton.
Installation of the Option 01 into the 1260-12 is described in the
Installation section of the 1260 Series VXI Switching Cards
Manual.
Installation of the 1260-12 Switching Module into a VXI
mainframe, including the setting of DIP switches, is described in
the Installation section of the 1260 Series VXI Switching Cards
Manual. The ID byte DIP switches, SW1-5 and SW1-6, should
both be set to OFF.
1260-12 User Manual
EADS North America Defense
Test and Services, Inc. © 1993
Advertisement
Table of Contents
