Advertisement
Table of Contents
Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of
purchase for a replacement.
Check that the product is secure and safe to use at regular intervals (at least every three months).
SMMA1034
Gas sprung single monitor arm
Installation Manual
27"
75x75/100x100
MAX
2~6.5kg
(4.4~14.3lbs )
R AT E D
Advertisement
Table of Contents
Related Manuals for GoStand SMMA1034
Summary of Contents for GoStand SMMA1034
- Page 1 SMMA1034 Use with products heavier than the rated weights indicated may result in instability causing possible injury. Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury. Safety gear and proper tools must be used. This product should only be installed by professionals.
- Page 2 M4x12 (x4) B (x1) C (x1) D (x1) M5x12 (x4) M-A/M-B M6x8 (x2) mm (x1) (x1) D (x4) A (x1) Do not overtighten screw. ±90° +90° ±180° -45° Do not overtighten screw. ±180° 1. Firmly hold the two halves of the spring arm together and have another person cut 0ff the cable tie from around the spring arm.
Need help?
Do you have a question about the SMMA1034 and is the answer not in the manual?
Questions and answers