Install the pump cover.
4.
Check that the pump cover
†
components are correctly
assembled.
Tighten the pump cover as far as
5.
it will go.
90°
The pump cover handle must
be vertical.
Install and close the service door.
6.
2
1
Cleaning and maintenanceNL
Before the next wash
To prevent unused detergent from
flowing into the drain during the next
wash, run the programmeDrainoff
after you have emptied the pump.
Open the tap.
1.
Plug in the mains plug.
2.
Switch on the device.
3.
Pour one liter of water into
4.
compartment II.
Select a suitable program for
5.
draining.
→ †Programs", Page 25
37