Panasonic nanoe EH-NA9F Manual page 15

英語翻訳 （English） Ø
Parts identification (P.8)
① nanoe™ outlet
② Mineral ion outlet (2 positions)
③ Air outlet (Quick‑dry nozzle)
④ Main switch
⑤ Air inlet
⑥ Mode indicator
⑦ nanoe™ lamp
⑧ Mode switching button
⑨ Voltage selector switch
⑩ Ion charge panel
How to use the hair dryer (P.12)
Please check the voltage rating and form of the electrical outlet before use.
⿟Using the key head, etc., turn the voltage selector switch until it
locks into place.
⿟Do not use a power supply voltage of 200-240 V with the voltage
selector switch still set to [100-120 V].
When used with the voltage selector switch set wrongly
• If a power supply voltage of 200-240 V is used with the voltage selector switch
set to [100-120 V]
A malfunction may result.
The noise will be abnormally loud, and the inner part will be bright red.
→ P lease turn the main switch [OFF], and use with the voltage selector switch
set to [200-240 V].
• If a power supply voltage of 100-120 V is used with the voltage selector switch
set to [200-240 V]
The temperature of the airflow will be low, and the airflow will be weak.
→ P lease turn the main switch [OFF], and use with the voltage selector switch
set to [100-120 V].
⿟Select the plug adaptor that matches the form of the household outlet, and plug it
into the household outlet.
⿟Use a towel to partially dry your hair, and then brush or comb your fingers to
remove tangles.
28
⑪ Handle
⑫ Ring for hanging
⑬ Bushing
⑭ Cord
⑮ Plug
⑯ Set nozzle
<Accessory>
⑰ C‑2 Plug adaptor
Dry your hair (P.14)
1. Select [TURBO] or [DRY] with the main switch.
2. Direct warm air throughout your hair.
3. When the hair is about 90% dry, use the hot/cold alternating mode to finish it
well, making the hair shiny.
• Select [ ] with the mode switching button.
When you are worried about damage to the tips, use the tip intensive care mode.
• Select [SET] with the main switch and select [
4. Turn the main switch [OFF].
5. Remove the plug from the household outlet.
• After the hair dryer has cooled down sufficiently, keep it in a place with low humidity.
Dry your scalp gently (Scalp care mode) (P.16)
This mode can be used to dry your scalp gently using hot air at approx. 60 ºC.
Do this after drying your hair by about 70% following procedure 2 above.
1. Select [SCALP] with the mode switching button and dry your scalp.
2. Select [HOT] with the mode switching button and dry your hair overall.
Moisturize your skin (Skin care mode) (P.16)
This mode can be used to keep moisture in your skin and attain moist feeling using
the air containing nanoe™ and mineral ions.
Do this after drying your hair following procedure 3 above.
1. Select [SET] with the main switch and select [COLD] with the mode switching button.
2. Place the air outlet at a distance of about 20 cm from your chin and apply air
for about 1 minute, moving the appliance to the left and right.
• Use with your eyes closed.
• Perform skin care using lotion or milky lotion, in the same way and timing as normal.
Reduce sensation of heat caused by hot air
(Intelligent temperature control mode) (P.17)
This mode can be used to automatically control the air temperature based on a room
temperature, and dry your hair comfortably.
Do this when you wish to reduce the hot sensation of hot air following procedure 2 above.
1. Select [TURBO] or [DRY] with the main switch and select [HOT] with the
mode switching button.
2. Press and hold the mode switching button for 1 second or more.
([HOT] changes to blinking)
• To return to the Hot air mode, press and hold the mode switching button for
1 second or more. Alternatively, turn the main switch off, and turn it on again.
] with the mode switching button.
英
語
翻
訳
（
）
29