Hitachi CP-S833E Operating Manual page 16

Adjustments and functions (continued)
SET UP
The menu SET UP serves for the change of parameters influencing the picture and for the move picture
position.
S E T U P I N P U T I M A G E O P T .
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL
Adjustment Item
VOLUME
BRIGHT
(BRIGHTNESS)
CONTRAST
SHARPNESS
COLOR
TINT
V.POSIT
(V.POSITION)
H.POSIT
(H.POSITION)
H.PHASE
H.SIZE
COLOR BAL
(COLOR BALANCE)
· When start up screen is displayed ("NO INPUT IS DETECTED"or "SYNC IS OUT OF
Caution
RANGE" is displayed), SETUP menu items other than VOLUME cannot be set.
· TINT cannot be adjusted with PAL/SECAM video signal input.
· TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.
· V.POSIT, H.POSIT, H.PHASE and H.SIZE cannot be adjusted with a VIDEO signal input.
16
RGB signal input
121
57
7
800
R B
Details of adjustment
Decrease
Dark
Lower
Soft
Less
Red
Moves the picture up or down.
Moves the picture left or right.
Decreases the picture flicker.
Windens of Narrow the horizontal size of the picture.
for Red
VIDEO signal input
SETU P INPU T IMAGE OP T.
VOLUME
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL
R
Increase
Bright
Higher
Sharp
More
Green
for Blue
B