To Turn Off The Power - Hitachi CP-S833E Operating Manual

Basic operations (continued)

To turn off the power

3
2
1 Press the STANDBY/ON button, for 1 second.
· The ON indicator lights up orange and the lamp turns off. (About 1 minute later), the fan stops
and the indicator blinks orange.
· Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in
standby mode.
2 Turn the MAIN POWER switch of the projector off.[
3 Install the lens cap.
· To reduce temperature inside the projector (cooling down), fan will rotate for about 1 minute
Caution
after the lamp is turned off.
· Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged.
PLUG&PLAY
This projector complies with VESA DDC1/2B specifications. PLUG&PLAY is a system with computer,
peripherals (including projectors), and operating system.
It works when the projector is connected to DDC (Display Data Channel) ready computer that is running
an operating system software that incorporates plug & play functionality.
(Only RGB 1)
1
RESET
MENU
MUTE INPUT
ON
LAMP TEMP
STANDBY/ON
1
STANDBY/ON MUTE
FREEZE
VOLUME
MAGNIFY
OFF
POSITION ON LASER
RESET RIGHT
MENU ON MOUSE ON
BLANK TIMER
RGB VIDEO
INPUT
: OFF]
13