Specifications - Hitachi VM-E455LA Instruction Manual

General Maintenance
LCD monitor.
CAMCORDER MALFUNCTIONS
Symptom
Random letters appear in
the viewfinder or on the
LCD monitor, or normal
operation is interrupted.
General Maintenance (cont.) pg. 58

Specifications

General Specifications
Power requirements
Power consumption
Dimensions
Weight
Operating temperature
Storage temperature
Video Recorder Specifications
Format
Record/playback
Video signal
Tape speed
Video output
Audio output
Fast forward/ rewind time
Camera Specifications
Scanning
Required minimum illumination
Pickup device
cassette and set the CAM/OFF/VIDEO switch to OFF, then wait for about one hour.
• Remove the cassette and then try to reinsert: remove it several times. If the indication is
still shown in the viewfinder or on the LCD monitor, use a cleaning tape to clean the
heads and replace the cassette.
Check Point & Correction
• External interference may have caused the camcorder's microprocessor to
malfunction temporarily. If random letters appear in the viewfinder or on the
LCD monitor, or if normal operation is interrupted, remove the power source
and clock battery, and then reattach them: the camcorder functions will
return to their default settings.
7.2V DC
3.4W (when recording/ LCD monitor OFF)
4-11/16" W x 4-1/16" H x 7-1/8" D
(118.5 mm x 102.5 mm x 181 mm)
VM-E455LA:
VM-H655LA
32°F - 104°F (0°C - 40°C)
-4°F - 140°F (-20°C - 60°C)
8 mm
EIA standard NTSC color
14.3 mm/sec
1.0 Vp-p, 75 ohm
-7.8 dBs (316mVrms)
525 lines / 60 fields / 30 frames
0.3 lux
1/4" C.C.D.
4.3W (when recording/LCD monitor ON)
1.87 lbs (approx. 850g) without battery pack and cassette
1.94 lbs (approx. 880g) without battery pack and cassette
Two video record/ playback heads
Less than 8 minutes with P6-120 cassette
63