All manuals and user guides at all-guides.com
ADS-B Traffic Menu
The Traffic Menu allows control of the traffic information display.
Select TCAS status:
Operate and Standby.
Select ADS-B Status:
Off, Surface, or
Airborne.
Select Motion Vector:
Absolute, Relative,
Off.
Motion Vector
When Absolute Motion Vectors are selected, the vectors extending from the
traffic targets depict the target reported track and speed over the ground. When
Relative Motion Vectors are selected, the vectors extending from the traffic targets
display how the traffic target is moving relative to your aircraft. The length of each
Motion Vector depicts the projected distance its associated target will travel in the
amount of time selected in "Vector Duration."
NOTE: Absolute motion vectors are colored either white or cyan. Relative
motion vectors are always green. The annunciation on the bottom of the
traffic page indicates vector type and length.
190-01007-04 Rev. K
ADS-B Traffic Menu
GTN 725/750 Cockpit Reference Guide
Touch to perform
traffic test.
Select Altitude Filter:
Normal, Above, Below,
Unrestricted.
Select Vector Duration:
30 sec, 1 min, 2 min,
5 min.
23