Advertisement
Quick Links
THANK YOU
Thank you for purchasing the L5-SD7 storage drawer.
Please read these instructions thoroughly before installing or assembling these products.
PRODUCT FEATURES
L5-SD7
• 7" Depth X 14" Width
• Left or right frame installation to align with wood kit.
• Weight capacity 25 lbs.
Instruction Sheet
L5-SD7
L5 Storage Drawer
I-00817
Rev -
Advertisement
Related Manuals for Middle Atlantic Products L5-SD7
Summary of Contents for Middle Atlantic Products L5-SD7
- Page 1 Instruction Sheet L5-SD7 L5 Storage Drawer THANK YOU Thank you for purchasing the L5-SD7 storage drawer. Please read these instructions thoroughly before installing or assembling these products. PRODUCT FEATURES L5-SD7 • 7” Depth X 14” Width • Left or right frame installation to align with wood kit.
- Page 2 IMPORTANT SAFETY INSTRUCTIONS / INSTRUCTIONS IMPORTAANTES SUR LA SÉCURITÉ SAVE ALL INSTRUCTIONS / CONSERVER CES INSTRUCTIONS WARNING/AVERTISSEMENT and the exclamation point within an CAUTION/ATTENTION and the exclamation point within an equilateral triangle is intended to alert the user to the possibility of equilateral triangle is intended to alert the user to the possibility of serious injury or death if the instructions are not followed.
-
Page 3: Weight Ratings
WEIGHT RATINGS Model Weight Rating L5-SD7 25 lbs. Maximum Total Rated Load REQUIRED TOOLS • #2 Phillips Screwdriver • 3/8” Nut Driver and Handle (Supplied) WARNING: Use tools with caution and follow all necessary safety protocols. AVERTISSEMENT: Utiliser des outils avec prudence et suivre tous les protocoles de sécurité... - Page 4 DRAWER SLIDE INSTALLATION NOTE: For 23”, 33” and 43” frames, storage drawer can be installed into left or right side of L5 frame to align with wood kit. (FIGURE A) (2x) slide mounting holes for (2x) slide mounting holes for installing storage drawer installing storage drawer on left side of frame.
-
Page 5: Drawer Installation
DRAWER SLIDE INSTALLATION (CONTINUED) 1. Slides (B) are marked as (L) and (R). Install the slide assemblies into the mounting holes and secure in place using (2x) hex nuts (D) each side. Tighten down using supplied nut driver and handle (C). (FIGURE B) NOTE: Slide stop bumpers must face inside Frame cut away... -
Page 6: Drawer Removal
Voice: 613-836-2501 - Fax: 613-836-2690 / ca.middleatlantic.com - customerservicecanada@middleatlantic.ca Factory Distribution USA: NJ - CA - IL Canada: ON - BC At Middle Atlantic Products we are always listening. Your comments are welcome. Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company. Page 6...