Sharp AR-PE2 Service Manual page 4

11) Remove the top cover of the printer controller and attach the
printer controller.
12) Connect controller side I/F cable and DC cable.
13) Attach the top cover of the printer controller.
14) Install all the parts that were removed to their original positions.
15) Attach the caution label to the cabinet. (Only EU version)
3. Setting
1) Turn on the power of the unit.
2) Enter the simulation 26-1 mode.
3) Press "PRN: AR-PE2" button. (Communication between the unit
and the printer controller is allowed.)
4) Cancel the simulation mode.
– 3 –