ID Tech IDFA-3153-IM Installation Manual

Installation of the IDTech Sign&Pay PIN Pad with Signature Capture
Hardware:
Model:
Keystroke Software:
KeyPay Software:
Connection to the Computer – USB:HID Setup
- With Keystroke POS closed, plug the device into an available USB port
- Allow Windows to update drivers (automatic)

Setup the PIN Pad hardware in Keystroke POS (USB:HID)

- In Configuration Manager, under Hardware - PIN Pad
- Under PIN Pad Type, select IDTech Sign&Pay USB:HID
- Under Port, Keystroke will automatically identify the port (i.e. USB:HID=2765-8976)
- Select OK to Save
- You can test the device by clicking on the Test PIN Pad option

Setup the Signature Capture hardware in Keystroke POS

- In Configuration Manager, under Hardware - Signature Capture
- Under Sig Cap Type, select IDTech Sign&Pay USB:HID
- Under Port, Keystroke will automatically identify the port (i.e. USB:HID=2765-8976)
- Select Ok to Save.
- You can test the device by clicking on the Test Device
Setup an Authorization Method for Credit Card payments that use the mag-stripe reader
- In Configuration Manager, under Tables - Authorization Methods
- Select the KPCREDIT Method and verify the Type is set to Credit Card
- Leave the 4 top fields and Settings ID blank
- Usually turn on Verify Address, Verify Zip, CVV2, and Manually Entered Only
- Ok Amount is not used so leave this blank
- Capture Signature should be checked (for Credit Cards)
- Skip Approved Message is optional. All Declines will always be displayed
- Under Card Reader, select PIN Pad-Card Swipe Only (Credit Cards)
Setup an Authorization Method for payments that use the PIN Pad & Mag-Stripe reader
- In Configuration Manager, under Tables - Authorization Methods
- Select KPDebit, KPEBT, or KPFood auth method and verify Type is set correctly
- Leave the 4 top fields and Settings ID blank
- Ok Amount is not used so leave this blank
- Capture Signature should be OFF (for Debit Cards as it is not required)
- Skip Approved Message is optional. All Declines will always be displayed
- Under Card Reader, select PIN Pad-DUKPT Encryption (Debit/ATM Cards)
Setup each Payment Type to use the corresponding authorization method
- In Configuration Manager, under Tables - Sales Payment Types
- Turn ON Start in Reference Field (if OFF, it will always prompt for manual entry)
- Turn ON Parse Reference
- Under the Auth Method Button, select the authorization method previously setup
Use (KPCREDIT for Credit Cards, KPDEBIT for ATM/Debit, or KPEBT for EBT Cash Benefits).
7/18/2014
IDTech Sign&Pay PIN Pad with Signature Capture device
Model #IDFA-3153-IM Rev A (live testing done 03/15/13).
Keystroke POS - v7.15 Build 20 or later (03/12/13).
v6.30.65 or later (03/05/13).
Specialized Business Solutions Page 1