Media sync(MTP)
Allows the phone to be used as MTP phone when a microSD card is present in the phone. It allows
transfer of protected content from the phone to the PC and vice versa.
To synchronize your phone with your computer using the USB
1. Connect your phone to your computer with a USB cable.
2. Autorun will check whether MTP driver is installed or not in your PC.
3. If the driver is not installed, the MTP driver will be installed automatically and your PC will be
rebooted. After rebooting, it is possible to transfer any fi les between the phone and the PC.
Note: For Windows® XP, MTP driver is not installed by default. So Autorun will install the MTP
driver automatically after checking existence of the driver. If Windows Media Player(WMP) over
version 10.x is installed on the PC, MTP driver may be installed. For Windows® 7 except for N
edition, the driver is installed.
USB Tethering
You can use your phone to provide a data connection to a computer by activating data tethering and
connecting them with a USB cable.
To tether your phone with your computer using the USB
1. Connect your phone to your computer with a USB cable.
2. Tap
>
> S ystem settings > C onnectivity > U SB tethering.
3. Tap OK if you agree with the prompt.
Note: Data Tethering requires an appropriate data plan. Phones connected by tethering use data
from your plan. Plans are not unlimited and significant charges may be incurred if the included data
allowance is exceeded. Performance may vary depending on the number of phones connected and
other factors.
You cannot access your phone's microSD card on your computer when using USB tethering.
Ask on connection
Checkmark to have the phone ask you to choose which USB connection mode it should connect
with to a PC.
Developer Options
Keep in mind that turning on these developer settings may result in irregular device behavior.
To turn on debug mode when USB is connected:
Settings
167