Advertisement
OPERATION
1. Open the cover and put the item you wish to clean into the tank. Fill the tank with
enough water to submerge the item.
Notes:
• Do not fill the water above the fill line in the tank.
• Running the water will cause damage to the cleaner.
2. Close the cover. Connect the power cord into a socket and turn the socket on. The
power indicator will then illuminate blue.
3. Press the ON button to begin cleaning the item. The cleaning indicator light will then
illuminate red.
Note:
The cleaner may emit noise during the cleaning process. This is normal.
4. After 3 minutes of cleaning, the cleaner will automatically stop, and the cleaning
indicator light will turn off.
If you wish to stop the cleaning process early, press the OFF button. If you wish to go
through another cleaning cycle with the same item, wait for 5 minutes to allow the
machine to cool, then press the ON button again.
5. Once finished, turn off the socket and unplug the power cord. Open the cover and
remove the item from the water. Pour the water out into a sink.
Other cleaning methods
For a stronger clean, you may use detergents or other cleaning agents with the machine.
Follow the directions on the chosen detergent/cleaning agent to clean the item.
For larger items that may not be able to be submerged, you may also clean smaller sections.
Ensure the level of water/cleaning agent used is low enough to prevent overflowing.
Advertisement
