Central Pneumatic 92841 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Paint Sprayer
  5. CENTRAL PNEUMATIC 92841
  6. Set up and operating instructions manual

Central Pneumatic 92841 Set Up And Operating Instructions Manual

Lvlp spray gun
Hide thumbs Also See for CENTRAL PNEUMATIC 92841:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
LVLP SPray Gun
Set uP and OPeratinG inStructiOnS
read this material before using this product.
Failure to do so can result in serious injury.
SaVe thiS ManuaL.
Copyright
2005 by Harbor Freight Tools
©
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 09k
Model
Visit our website at: http://www.harborfreight.com
92841
. All rights reserved. No portion of this manual or any
®

Advertisement

Table of Contents
loading

Related Manuals for Central Pneumatic CENTRAL PNEUMATIC 92841

Summary of Contents for Central Pneumatic CENTRAL PNEUMATIC 92841

  • Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.

  • Page 2: Specifications

    SPeciFicatiOnS 20 - 45 PSI, Operating Pressure 50 PSI max. Continuous Air 5.5 to 9 SCFM Consumption Recommended Hose 1/4” I.D. Diameter Net Weight 1.7 lb. Cast Aluminum with Body Construction Aluminum Cup Valve Construction Zinc Plated Brass Air Inlet 1/4”...
  • Page 3 Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 15. do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
  • Page 4 When unpacking, check to make sure the following parts are included. LVLP Spray Gun Paint Cup If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Page 4 For technical questions, please call 1-800-444-3353.
  • Page 5 9 SCFM. Provide yourself with a compressed air supply which will meet these requirements. Air compressors and related supplies are available from Harbor Freight Tools. For best results, arrange your compressed air supply to include a filter and regulator as indicated in the schematic diagram above.

  • Page 6: Operation

    OPeratiOn Prepare the work piece to be painted according to paint manufacturer’s directions. Prepare your paint mixture according to paint manufacturer’s directions. NOTE: In most cases, paint must be thinned for proper spraying. Be sure to use a thinner recommended by the paint manufacturer.
  • Page 7 surfaces are more prone to “run” than horizontal surfaces due to the effect of gravity. applying the Paint In most cases, it is best to move the paint spray from side to side, overlapping the previous paint. In this way you will gradually build up the paint layer without leaving any obvious edges.

  • Page 8: Maintenance

    Using a clean rag wetted with solvent, wipe off the Spray Gun to remove paint from the exterior. Store your paint sprayer in a clean dry place. Page 8 For technical questions, please call 1-800-444-3353.

  • Page 9: Troubleshooting

    Problem Possible causes a) Air Nozzle cracked or worn. b) Leak at attachment or seal Paint breaking, spitting, c) Needle packing worn out fluttering or irregular d) Insufficient paint in cup spray e) Vent hole in paint container clogged a) One of the vent holes in the One-sided paint pattern Air Nozzle is clogged a) Bore of Air Nozzle is partially...

  • Page 10: Parts List

    Part description Nozzle Lock Ring Air Nozzle Nozzle Inner Ring Spray Nozzle Nozzle Washer Housing Trigger Pin Snap Ring Trigger Pin Trigger Lock Air Control Seal Air Control Needle Valve Air Control Knob Air Control Valve Seal Air Control Valve Seat Air Control Valve Seal Air Control Valve Body Air Control Seal Ring...

  • Page 11: Assembly Drawing

    assembly drawing nOte: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 92841 For technical questions, please call 1-800-444-3353. Page 11...
  • Page 12 90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents