Advertisement
2.2.4 CHECKUP AND ADJUSTMENT OF MECHANISM PHASE
NOTE:
Pay careful attention to the installing order and phase of mechanism parts of the loading system.
[35] LOADING GEAR(T) ASSEMBLY
Align the hole of the LOADING GEAR
(T) ASSEMBLY to that of the MAIN
DECK hole.
[9] WEEL GEAR
Align one of the three holes of
WHEEL GEAR to MAIN DECK hole.
Align this part to each
"Triangle" mark.
MAIN DECK
Fig.2-2-5 Top of main deck
Align this part to each
"Triangle" mark.
REC SAFTY SW
Fig.2-2-6 Rotary encoder
[37] LOADING RING ASSEMBLY
Align the two holes of the LOADING RING
ASSEMBLY to those of MAIN DECK.
[33] LINK LEVER
Align the hole of the
LINK LEVER to MAIN
DECK hole.
[33] LINK LEVER/CONTROLL CAM
Align each one LINK LEVER
assembly hole and MAIN DECK hole
to the hole at the CONTROL CAM
position.
S-CASS SW
CASS SW
(No.86700)2-27
Advertisement
