Table of Contents
Advertisement
Remove the chute adapter from the slide gate
valve.
When doing this, make certain the valve doesn't
inadvertently turn.
Remove the chute from the stopping tool.
Push gauge rod to lowest position to expose the
stopper connection and disconnect the MDS
Stopper.
Clean and store MDS Stopper in transportation
case. Do not leave it on the ground.
Inspect the stopper for damages.
Clean the stopper with a cloth.
Place a protection cap over the thread.
Remove gauges.
Clean and store stopping tool in its case.
Kleiss MCS7-2PVC System Manual
www.MainlineControlSystems.com
|
27
Advertisement
Table of Contents
