MAINLINE Kleiss MCS7-2PVC System Manual page 22

For proper MDS Stopper insertion into the

pipeline, use Kleiss silicon spray to lubricate the
stopper. (Do not use spray from local builder
merchants as they make the stopper to slippery
and may contain solvents.)
Spray the back of the stopper at the conical

connection.
Spray the front of the stopper around the nose.

Do NOT spray the body of the stopper.

Using the gauge rod, pull the stopper connection

as far as possible into the tower.
Lock the gauge rod by operating the black thumb

screw.
Using the same Kleiss silicon spray you used

on the stopper, lightly spray the open end of the
chute.
Kleiss MCS7-2PVC System Manual
www.MainlineControlSystems.com
|
21