Checking the battery power
The battery
checker is designed to check the
output of the mercury battery. By taking a few
seconds to check battery output before starting
each new roll of film,
using the camera after it has been stored for an
extended period of time or a new battery has
been inserted, you can avoid poor exposure due
to insufficient
electric power.
1. Turn the battery switch on the base of the
camera to the ·'B.C." position.
All manuals and user guides at all-guides.com
and particularly
when
2. If the indicator
needle points to the battery
check. mark as shown in the picture, the
battery
can
be
properly.
CAUTION:
• Do not leave switch setting at battery check
position as the continuous
will cause the battery to go "dead" in a few
hours.
regarded
as functioning
high battery drain