ITALFILE Jane F Instructions

Thank you
for choosing
BLUE
LED

DUPLICATION

• Place the original remote pointing the B area of Jane F
• Press and hold one of the A button, that you want duplicate
• After 6 seconds, the blue LED starts to flash, entering in clone mode
• When the blue LED flashes, press and hold the channel's button of original remote and wait till
Jane's blue LED stops to flash and becomes fixed
When the blue LED becomes fixed it means that the original code has been cloned and
transmitted from original remote into Jane F
• Then, the blue led remains steady for 2 seconds and then it turns off
• Release the A button and the button of the original remote
• Then duplication is complete
To duplicate the code from a second channel choose another
A button and repeat the operation.
If the blue LED after flashing turns off, it means that cloning process
is not active and it maintains the original code or the code previously
duplicated.
Repeat then the operation, pressing the button of external remote
immediately after the blue LED starts to flash.
Jane F can clone and replace fixed code remotes with frequency
433.92MHz
Jane F s as efficient as the original remote or more
because designed to transmit 433.92 Mhz frequency, only
A
B zone
A
B zone
3v
CR2023
lithium