WAGNER TempSpray H126 Operating Manual page 30

GB
TABLE OF CONTENTS
Table of Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 31
1.1 Flash point _________________________________ 31
1.2 Explosion protection _________________________ 31
1.3 Danger of explosion and fire from sources of ignition
during spraying work ________________________ 31
1.4 Electric charge (spark and flame formation) ______ 31
1.5 Earthing of the object ________________________ 31
1.6 Protective earthing of the heating hose _________ 31
1.7 Use of units on building sites and workshops _____ 31
1.8 High pressure hose __________________________ 31
1.9 Personal protection while hot spraying _________ 32
1.10 Cleaning the unit ___________________________ 32
1.11 Cleaning the unit with solvents ________________ 32
1.12 Work or repairs at the electrical equipment ______ 32
1.13 Work at electrical components _________________ 32
1.14 Max. operating pressure ______________________ 32
1.15 Setting ____________________________________ 32
2 OVERVIEW OF APPLICATION ________________ 33
2.1 Range of application _________________________ 33
2.2 Coating material ____________________________ 33
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 33
3 DESCRIPTION OF UNIT _____________________ 33
3.1 General function of the devices ________________ 33
3.2 Explanatory diagram _________________________ 34
3.3 Transport __________________________________ 35
3.4 Technical data TempSpray-H326 _______________ 36
3.5 Technical data TempSpray-H226 _______________ 36
3.6 Technical data TempSpray-H126 _______________ 37
4 STARTUP _________________________________ 38
4.1 TempSpray-H326 and TempSpray-H226 _________ 38
4.1.1 Connection to the mains network ______________ 38
4.1.2 Cleaning preserving agent when starting-up of
operation initially ___________________________ 38
4.2 TempSpray-H126 ___________________________ 39
4.2.1 Connection to the mains network ______________ 39
4.2.2 Cleaning preserving agent when starting-up of
operation initially ___________________________ 39
4.3 Switch-on __________________________________ 40
4.4 Temperature adjustment _____________________ 40
30
TempSpray-H326 / -H226 / -H126
5 HANDLING THE HIGH-PRESSURE HOSE _______ 41
6 INTERRUPTION OF WORK ___________________ 41
7 CLEANING THE DEVICE _____________________ 41
7.1 Cleaning the unit from the outside _____________ 41
8 SERVICING ________________________________ 42
8.1 General servicing ___________________________ 42
9 REPAIRS AT THE UNIT ______________________ 42
9.1 TempSpray-H326 and TempSpray-H226
Changing the power cord _____________________ 42
9.2 TempSpray-H126
Changing the power cord _____________________ 43
9.3 Insulation test with 1000 volts DC during
device inspection by Service __________________ 43
9.4 Eliminating faults ___________________________ 44
9.5 Circuit diagram TempSpray-H326 / -H226 ________ 45
9.6 Circuit diagram TempSpray-H126 ______________ 46
10 SPARE PARTS AND ACCESSORIES ____________ 47
10.1 Accessories TempSpray _______________________ 47
10.2 Overview of TempSpray versions and spray packs _ 47
10.3 Spare parts list TempSpray-H326 / -H226 ________ 48
10.4 Spare parts list heating hose
TempSpray-H326 / -H226 ______________________50
10.5 Spare parts list TempSpray-H126 _______________ 51
10.6 Spare parts list heating hose
TempSpray-H126 ___________________________ 52
Testing of the unit ________________________________ 53
Important information on product liability_____________ 53
Note on disposal __________________________________ 53
Guarantee declaration _____________________________ 53
CE - declaration___________________________________ 54
European service network _________________________ 112