Carrier INFINITY 50XT-A Owner's Information Manual

Single packaged heat pump system with puron (r-410a) refrigerant

Hide thumbs Also See for INFINITY 50XT-A:

Download this manual See also: Instruction and Installation Manual

50XT---A

Infinityr 15 SEER

Single Packaged Heat Pump System

with PuronR (R---410A) Refrigerant

Owner's Information Manual

For your convenience, please record the model and serial numbers of your new equipment in the spaces

provided. This information, along with the installation data and dealer contact information, will be helpful

should your system require maintenance or service.

UNIT INFORMATION

Model # _____________________________________

Serial # ______________________________________

ACCESSORIES (List type and model #)

_____________________________________________

Fig. 1 - - Unit 50XT- - A

NOTE TO EQUIPMENT OWNER:

NOTE TO INSTALLER:

This manual must be left with the equipment owner.

INSTALLATION INFORMATION

Date Installed ________________________________

DEALERSHIP CONTACT INFORMATION

Company Name_______________________________

Address______________________________________

_____________________________________________

Phone Number _______________________________

Technician Name _____________________________

_____________________________________________

A09032

Page 1 50XT---A Infinityr 15 SEER Single Packaged Heat Pump System with PuronR (R---410A) Refrigerant Owner’s Information Manual For your convenience, please record the model and serial numbers of your new equipment in the spaces provided. This information, along with the installation data and dealer contact information, will be helpful should your system require maintenance or service.
Page 2 Before performing recommended maintenance, be sure the main power switch to unit is turned off. The operation of your heat pump system is controlled by the Infinityr User Interface (UI). You may adjust the temperature manually through the UI or program the UI for automatic control.
Page 3 ice from the unit grille. This condition will not affect the proper function of the unit and will clear within a few days. Emergency Heating Mode In the event of primary unit heat failure, the emergency heat mode allows your supplemental heating source to keep your home or of- fice warm until your unit can be serviced.
Page 4 “Heating Equipment” or “Air Conditioning Contractors & Systems” heading for dealer listing by brand name. Have available the Model No., Series Letter, & Serial No. of your equipment to ensure correct replacement part. Copyright 2009 Carrier Corporation Manufacturer reserves the right to change, at any time, specifications and design without notice and without obligation.