Grundig MC 5040 Manual page 23

POWER SUPPLY ________________________
Using the charging stand
1
Press the On/Off switch
switch off the appliance.
2
Insert the charging plug into the
socket at the back of the charging
stand.
3
Plug the power adapter into the
wall socket.
4
Place the appliance in the charg-
ing stand.
– The charge indicator LED
lights up blue.
– When the appliance is fully
charged, the charge indicator
LED disappears.
F
5
Pull the power adapter out of the
wall socket.
6 Remove the appliance from the
charging stand.
Operating with the
power adapter
to
E
Check that the voltage indicated
on the rating plate of the power
adapter corresponds to your local
power supply.
The only way to disconnect the ap-
pliance from the power supply is to
unplug the power adapter.
1 Plug the charging plug
appliance socket and the power
F
adapter into the wall socket.
– The appliance is now ready to
Caution
When used in the bathroom
7
or beside a water connection,
only use the appliance in bat-
tery mode; never run it from the
mains.
operate.
into the
G
ENGLISH 23