Cleaning The Spray Arms - Atag DW7113XA Operating Instructions Manual

NOTE!
Dishwashing results may be affected if the coarse and fine filters are incorrectly fitted. The
dishwasher must not be used without the filters in place!

Cleaning the spray arms

Holes and bearings can sometimes become blocked. Remove any debris using a pin or the like.
The spray arms also have holes underneath.
To facilitate cleaning you can remove the spray arms. Remember to fit them firmly back into place
afterwards.
Upper spray arm
The upper basket must be removed before the upper spray arm can be released. Pull out the
upper basket and turn the basket catch on each runner outwards (see illustration). The basket
can now be removed.
Pull the upper spray arm straight up to release it.
Check that the coloured stop
on the right in the bottom
drain is in place.
Care and cleaning
25