Dialling A Phonebook Entry - Cable & Wireless CWD2601 Manual

CWD2600 Phonebook.fm Page 20 Friday, May 16, 2003 9:04 AM
Cable & Wireless CWD2601 DECT Telephone
To enter a space, press the '1' key once. To enter 1,
press this key twice.
You can include other
characters in names in phonebook entries by the
use of the * key. The character is displayed and
cycles through the following sequence for each
press of the * key.
At the required position as the name is entered,
press the * key the appropriate number of times to
enter the special character required. These are
shown below in parenthesis:
( * ) , ( - ) , ( _ ) , ( : ), ( / )
Press OK. The LCD displays NUMBER?
OK
Enter the telephone number (maximum of 18 digits).
The symbol is displayed when the number has more
than 16-digits.
"
Note: If you make a mistake while entering the
name or number, press
character entered. Repeat for any earlier
incorrectly entered characters and then re-enter
the required characters.
Press to store the name and number. The telephone
OK
OK
number entered must be unique. If it is not, the display
continues to display the number.
Helpline 0870 241 3201
C
non-alphanumeric
OK
to delete the last
C
20
Using the Phonebook
To exit, press Cancel.
"
Note: If there are already 50 records in the
phonebook, when ADD ENTRY is selected the LCD
displays FULL and then returns to ADD ENTRY.

Dialling a phonebook entry

You can call a number stored in your phonebook:
"
Note: To make a call using this method, there
must be at least one valid number stored in the
Phonebook.
Press Phonebook during pre-dial or standby.
The LCD displays ADD ENTRY.
Use Scroll to scroll until the required name is displayed
Press OK to view the number.
Press Talk to dial out the selected phonebook number.