Advertisement
Advertisement
Table of Contents
Related Manuals for Fomei Digitalis Pro 200S
Summary of Contents for Fomei Digitalis Pro 200S
- Page 1 Studio flash Digitalis Pro 200 / 400 / 600 S...
- Page 2 Thank you for your confidence in our company and wish you much success in your projects. Safety precautions Do not use the product before reading the manual Do not expose the moisture Do not try to disassemble the product Do not expose the product to the electromagnetic field Do not expose the product to big variations in temperature in humid environment.
- Page 3 Components 1) Glass cover of lamps 2) Modeling lamp 3) Flash tube 4) Modeling lamp bayonet 5) Accessories bayonet lock 6) Light sensitive sensor for cell mode (slave mode) 7) Joint for adjusting light angle...
- Page 4 8) FND display 9) 220V power cable input 10) Fuse socket 11) Sync cable input 12) Power (on/off) 13) Slot for receiver 14) Light sensitive sensor for cell mode (slave mode) 15) Control panel functions...
- Page 5 Controls 1) Connect the power cable into power grid 2) Put the receiver into flash head socket 3) Turn the light on 4) Set up the light intensity and other function by instructions below Modeling lamp / flash settings Intensity adjustment by 0,1 or 0,5 steps Proportional adjustment of modeling lamp and flash a tone (on / off) Light sensitive sensor activation (slave mode) Flash is charged and ready - sound signal (on / off)
Need help?
Do you have a question about the Digitalis Pro 200S and is the answer not in the manual?
Questions and answers