Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fomei Digitalis Pro S600 DC
Summary of Contents for Fomei Digitalis Pro S600 DC
- Page 1 Digitalis Pro S600 DC Cordless Strobo Flash...
- Page 2 Thank you for purchasing the Fomei Digitalis Pro S600 DC cordless flash. Before using the flash, read carefully the user's manual. We recommend the cordless flash mainly to photographers who travel frequently and photograph various outdoor and indoor locations. The flash contains a rechangeable Li-Ion battery, which can be charged...
-
Page 3: For Your Safety
For your safety In order to prevent a fire or injury by electrical shock, always hold this product away from rain and moisture. This product contains electronic components working under high voltage. Contact with the high voltage circuit inside the product may cause an injury by electrical shock. Do not disassemble. In the event of repairs being necessary, this product must be sent to an authorised service centre. -
Page 4: Product Description
3. Product Description Flash power level control 8.0 – 1.0 Pilot LED light power level control RPT Strobo functions/use button to switch to position "C" MODE Flash speed control/switch to position "T" CELL – turn the light sensitive sensor on/off SOUND –... - Page 5 Flash discharge lamp of the device Pilot LED light Lock for bayonet/bayonets for attaching accessories Handle for carrying the device Light sensitive sensor Lock screw/tilting joint...
-
Page 6: Putting The Device Into Operation
4. Putting the device into operation The flash is equipped with protective features for transport. The pilot LED light and discharge lamp are protected by a Pyrene glass cover with a thread. The glass cover is protected by a plastic protective cover. -
Page 7: Flash Modes
ATTENTION: If you go from "T" mode to Normal mode, launch the TEST button several times so that the capacitors achieve the correct flash power and flash speed. Digitalis Pro S600 DC 1/12800 s 1/6400 s 1/4000 s 1/2500 s 1/1250 s 1/640 s 1/500 s Colour temperature 5400 K... -
Page 8: Technical Information
The pilot LED light is variably controllable using the controller MODEL (2) and serves to make focusing the camera easier during poor light conditions. 8. Technical information Model Digitalis Pro S600 DC Flash power level: 4.5 – 600 Ws F – stop (ISO 100, 1m) Flash power level control 7 F-stops (adjustable in 0.1 F-stop increments) - Page 9 WASTE DISPOSAL AT END OF THE PRODUCT'S LIFETIME: The product contains electronic components. Do not throw this product in with communal waste, take it to a processor of waste materials or to a recycling centre or to a collection location for this type of waste.
- Page 10 Notes...
Need help?
Do you have a question about the Digitalis Pro S600 DC and is the answer not in the manual?
Questions and answers