Introduction; Manual Accuracy; Contact Info - Grizzly G0457 Owner's Manual

Manual Accuracy

We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings,
and photographs of the machine we used when
writing this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous improve-
ment, your machine may not exactly match the
manual. If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
Manufacture Date
of Your Machine
For your convenience, we post all available man-
uals and manual updates for free on our website
at www.grizzly.com. Any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
-2-

INTRODUcTION

contact Info

We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
for your Own Safety Read Instruction
Manual Before Operating Bandsaw
a) Wear eye protection.
b) Do not remove jammed cutoff pieces
until blade has stopped.
c) Maintain proper adjustment of blade
tension, blade
bearings.
d) Adjust upper guide
workpiece.
e) hold workpiece firmly against table.
g0457 14" industrial Bandsaw (Mfg. Since 5/11)
guides, and thrust
to just clear