Table of Contents
Advertisement
Temperature Temperature
USB
Down
• Power On/Off: Press the Power Button
• Temperature Setting: Can be adjusted by the "+" button up to 20 C (Max) and
down to -20 C (Max) by the "- "button; Default temperature is Celsius degree
If you would like to change to degrees Fahrenheit (F), turn off the fridge, then
press and hold the SET button over 3 seconds. E1 should be displayed on screen
and begin flashing;
continue to press the SET button until E5 shows up, then press + or -, select
desired units: F or C.
The compressor will cool down the temperature from 10 C to -10 C in 20
•
mins. However, this reflects the change in temperature within the insulated
walls of the fridge/freezer. Allow an additional hour or more time,
depending on the food load, to reach a refrigerating temperature around 1-
6 degrees Celsius. To reach freezing temperatures with food or beverage
inside the unit will take approximately 8 hours. Therefore, if you want
frozen or chilling temperatures inside, we suggest you turn on the
compressor 10 hours ahead of time while keeping the temperature setting
at -15 % or lower
• Cooling Mode Control: Press the "
Presses will switch between MAX (Quick cooling mode) and ECO (Energy-saving
mode)
(tip: Max mode is recommended to begin initial cool down). After desired
temperature has been attained, it is recommended to switch to ECO mode to
conserve energy cooling mode.
UP
to turn the unit on/off
" button to select control mode. Short
Power Button "SET"Button
(c).
Advertisement
Table of Contents
