Table of Contents
Advertisement
• AC Charging Management
O AC charging is always the first choice if AC power supply is available. Check
AC voltage range and use AC adapter to connect with AC power outlet.
o We suggest charging the refrigerator Portable Power Station to full using AC
adapter before you leave for a trip or outdoor activity.
O If the fridge has not been in use for a long time the Portable Power Station
may have over discharged and unit will not power on. Please use AC adapter
to charge unit to working mode. After unit has received up to 30% charge
other charging methods may be used.
• Car Port Charging Management
o Engine Turned-on: You can choose anyone of H, M or L mode (see car
battery in Chapter 5) and use car port power to operate the freezer.
Different cars may have different power output voltages. If the voltage
protection causes F1 error showed in the LCD, just set the Portable Power
Station protection from H to M or L. If the F1 error is still present, please
charge the unit with the adapter for few minutes and normal operation will
resume.
o Engine Turned-off: Charging using car battery: Most cars will stop power
supply if engine is stopped, but some cars will continue power supply even
when engine is stopped. You should adjust the battery protection to H,
otherwise, the power of your car battery may run out and it may not have
enough power to start car. You can also unplug the car port charger and run
the fridge/freezer using its internal Portable Power Station. If you don't want
to use car battery it is recommended to disconnect the car charger from the
fridge and turn on Power Station .
8
Advertisement
Table of Contents
