O P E R A T I O N
M A N U A L
Using the 151 MK2 Without a Network
You can also use the device without a connection to a network and operate it via Wi-Fi
with a computer (tablet, PC, Mac). In this case, however, you cannot connect the
to other network devices or use the benefits of an Internet connection (see "Establishing
a cabled connection to the network" on page 31).
To operate the
the standard mode set at the factory to stand-alone mode.
SWITCHING THE OPERATING MODE TO STAND-ALONE MODE
Press the OSD button on the remote control, followed by the buttons
1.
— All the LEDs on the device light up orange.
For stand-alone mode, press
2.
— The NETWORK LED on the device flashes red during the switching process.
— Once the switch has taken place, the NETWORK LED lights up orange.
In stand-alone mode, the device itself acts as an access point. To operate it via
a computer (tablet, PC, MAC), you can now establish a direct Wi-Fi connection between
the
151
3 4 | 5 4
MK
without a network, the operating mode must be changed from
151
2
MK
and a tablet.
2
followed by OK.
1
MK
151
2
–
–
.
7
8
9