Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.
Important Safety Instructions Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Introduction Menu Press to access the television menu. Channel ± Press to adjust the television channel. Volume ± Press to adjust the volume. Source Press to adjust the source. Power Press to turn the television off and on. Stereo Headphone Jack Component Optical Audio...
Page 7
POWER Press to power the television off or on. SLEEP Press repeatedly to set the sleep timer. After the set time has expired the television will automatically power off. ASPECT Press to adjust the aspect ratio between WIDE, CINEMA, ZOOM, and NORMAL. PICTURE Press to adjust the picture between STANDARD, MOVIE, USER,...
Setup Connecting a TV Antenna Requires a TV antenna (not included). 1. Connect a VHF, UHF, or HDTV antenna to the RF INPUT on the television. 2. Press the SOURCE button to switch to TV mode. 3. Press the MENU button to access the setup menu.
Basic Operations Channel List View 1. Press the SOURCE button to switch to TV mode. 2. Press the CH LIST button, on the remote, to view a list of available channels. Unless you are using a Set-Top Box, you must auto scan for channels before being able to view channels in list view.
Connecting Other Devices (Set-Top Box, Gaming Device, DVD Player, or VCR) Connecting a Set-Top Box You will need: a set-top box, composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable. (not included) 1. Connect the set-top box’s audio and video outputs to the corresponding audio and video inputs on the television.
4. Press the EXIT button to return to the media menu. The USB port can also be used to upgrade the televisions firmware. For detailed instructions and the latest software, go to www.gpx.com VGA/PC INPUT and PC AUDIO INPUT OPTICAL AUDIO OUTPUT...
Company Information International Support To download this User’s Guide in English, Spanish, or French, visit the support section at www.gpx.com. Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.gpx.com. Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien...