Controls; Key-Operated Ignition Switch Functions - PEUGEOT KISBEE 50 2021 User Manual

7 - Maintenance indicator
- The maintenance indicator appears on the display
each time the service recommended by the
manufacturer is due.
Maintenance frequency
5000 km
Maintenance counter reset.
- Ignition off, hold down the control button (A) and turn
on the ignition, the distance unit flashes
- Release the settings button.
- Hold down the settings button for more than 5 seconds
to switch off the maintenance symbol and set the
maintenance counter to zero.
- Turn off the ignition.
You are advised to go to an authorised
dealer to have the vehicle serviced and
the message on the maintenance
indicator erased.
b
a
c
1. Dipped lights/Headlights switch
The dipped lights/headlights switch has 3 functions:
a. Dip beam
b. High beam
c. Flashing the lights. (Passing)
2. Horn switch
3. Indicators switch
To indicate a change of direction, press the switch:
• Either to the right.
• Or to the left.
To stop the indicators flashing, press the switch.
4
4. Starter switch
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles

CONTROLS

1
2
3
KEY-OPERATED IGNITION SWITCH
FUNCTIONS
A. The engine is off. Power to the electrical circuit is off.
The key can be removed.
B. Power to the electrical circuit is on. The engine can be
started. The lighting is switched on. The key cannot be
removed.
A
D
C
C.Power to the electrical circuit is off. The handlebars are
turned to the left. Steering can be locked. The key can
be removed.
D.Action of the key in this position allows you to open the
saddle with a cable device.
FR
GB
DE
B
IT
ES
NL
GR
SE
PT
FI
DK
11/20