Operations - Lunix LX3 Manual

Operations

Place your hand with your palm facing down into the hand
massager before turning the device on. You will notice that
your palm should fit perfectly inside. If you don't feel comfortable,
you may adjust your hand until you find the perfect spot. The front
opening provides a better comfort and a maximum ventilation.
POWER
BUTTON
POWER ON:
button for 2 seconds, the hand
massager will switch on, then
press the program button, the
hand massager will start to
work.
POWER OFF:
for 2 seconds in order to shut
down the device. The airbags
will progressively deflate.
The default massage run time
is 15 minutes meaning the
power will be turned off
automatically after 15 minutes.
You can start it again if you
want to go for a second
session.
14
Long press the
Press the button
PLEASE WASH YOUR HANDS
EACH TIME BEFORE USING
THE HAND MASSAGER
INTENSITY
BUTTON
The default intensity is l3 out
of 6 different intensity levels
from the weakest l1 to the
strongest l6. You can increase
or decrease the intensity level
by pressing the button.
We strongly recommend for
those who have very sensitive
hands use
intensity l1, as a higher intensity
may be uncomfortable.
Wait for a few days in order to
feel pain relief and to feel the
full benefits of the massage.
the lowest