Table of Contents
Related Manuals for EZ FLO 10701
Summary of Contents for EZ FLO 10701
- Page 1 10701 10703 Single Control Kitchen Faucet With Pull Down Spray Tools and Supplies Before You Begin You will need the following to install your new faucet: Check to make sure you have the following: Adjustable Pipe Phillips Silicone Screwdriver Wrench...
- Page 2 Faucet Installation Shut off main water supply before installation. Ø1 3/8”~Ø1 1/2” (Ø35mm~Ø38mm) Ø1 3/8”~Ø1 1/2” (Ø35mm~Ø38mm) 1/16”~1 1/2” 1/16”~1” (1mm~38.1mm) (1mm~25.4mm) The cover plate is optional, please determine whether you want to install The word “FR↑NT” on the top mounting or not.
- Page 3 Faucet Installation Blue Line Red Line Blue Line Red Line Cold Tighten the set screw Attach the quick connector Connect water supply with the hex wrench. over the sprayer hose. lines and tighten water supply nuts. Locate here Protective Cap Remove the protective cap from the outlet port prior to pushing the hose Attach the weight to adapter onto the same port, you will hear a "click"...
- Page 4 Troubleshooting Guide Minor problems often can be fixed without a plumber. Before doing any work on the faucet, shut off water supply and close stopper or drain to avoid losing small parts. Leaks underneath handle. Locking nut has come loose. O-ring Tighten the locking nut.
Need help?
Do you have a question about the 10701 and is the answer not in the manual?
Questions and answers