Table of Contents
Advertisement
System setup enables you to manage your tablet hardware and specify BIOS level options. From the System setup, you can:
● Change the NVRAM settings after you add or remove hardware
● View the system hardware configuration
● Enable or disable integrated devices
● Set performance and power management thresholds
● Manage your computer security
Topics:
•
Accessing System Setup BIOS
•
Entering BIOS without keyboard
•
System setup options
•
Updating the BIOS
•
System and setup password
Accessing System Setup BIOS
Latitude 5285 Extreme Tablet BIOS can be accessed without keyboard and with keyboard. To navigate follow the procedure:
Without Keyboard:
1. Power on the Latitude tablet.
2. Hold down the Volume Down button during startup (as the Dell logo appears) until the BIOS (System Setup) page is
displayed.
With Keyboard:
1. Power on the Latitude tablet.
2. Tap <F2> during startup (as the Dell logo appears) until the BIOS (System Setup) page is displayed.
Entering BIOS without keyboard
1. Press the power button to turn on your tablet.
2. Press and hold the Volume Up button when the Dell logo appears on the screen.
3. When the F12 boot selection menu appears, select BIOS Setup using the Volume Up button.
4. Press the Volume Down button to enter BIOS setup program.
System setup options
NOTE:
Depending on the tablet and its installed devices, the items listed in this section may or may not appear.
System setup
System setup
4
49
Advertisement
Table of Contents
