Advertisement
3.1.5 Remove the main board (See figure 8, figure 9)
• Prior to performing the following procedure, remove the top
cover, drive unit, HDD.
(1) Disconnect the card wire from connector CN4103,
on the main board.
(2) Disconnect the socket wire from connector CN1101,
CN1102,
CN7001
on the digital board and display board.
(3) Disconnect the socket wire from connector CN3004,
CN5303
on the main board.
(4) Disconnect the power cord from connector
main board.
(5) Remove the six screws I attaching the main board.
(6) Remove the seven screws J attaching the rear panel with
main board.
(7) Remove the one screw K attaching the tuner.
3.1.6 Remove the display board (See figure 10)
• Prior to performing the following procedure, remove the top
cover, drive unit, HDD, front panel assembly.
(1) Disconnect the socket wire from connector
display board.
(2) Remove the two screws L attaching the display board.
CN1102
CN4001
CN5001
on the
Digital board
CN7001
on the
CN1101
CN4001
Display board
I
CN7001
Main board
I
CN4103
Fig.8
K
J
Fig.9
L
Display board
CN7001
Fig.10
CN3004
I
I
I
I
CN5303
CN5001
J
Rear panel
L
(No.YD089)1-9
Advertisement
