Using A Wireless Connection - Gigabyte AirCruiser GN-BR30N-RH User Manual

side panel of the GN-BR30N-RH and the other end to the 10/100
Ethernet port of your computer.
select).
Step 4 Plug the power adapter cord into the router's power jack and then
plug the power adapter into a power outlet.
Step 5 Turn on your ADSL/Cable modem. After verifying all the connections,
proceed to Chapter 5 Connecting the Router to the Internet.

Using a Wireless Connection

Step 1 Turn off all the hardware devices in your network, including the
ADSL/Cable modem by unplugging their power supply.
Step 2 Connect the Ethernet cable of your ADSL/Cable modem to the WAN
port of the GN-BR30N-RH.
Step 3 Plug the power adapter cord into the router's power jack and then
plug the power adapter into a power outlet.
Step 4 Turn on your ADSL/Cable modem.
Step 5 Insert you PCMCIA notebook card, or wireless USB adapter into
your notebook PC.
Step 6 If using a GIGABYTE PCMCIA notebook card, SmartSetup 3 will
automatically detect your BR30N-RH and walk you through the setup
procedure (for more details refer to your SmartSetup 3 Guide).
Please refer to your vendor's users manual for connecting to the
wireless network.
Step 7 When scanning for available wireless networks, your BR30N-RH's
factory default SSID name is GIGABYTE. Select it using the
procedures described in your particular vendor's notebook adapter
users manual.
Step 8 After verifying all the connections, proceed to Chapter 5
Connecting the Router to the Internet.
GN-BR30N-RH 2.4GHz AirCruiser N300 Wireless Router
(It does not matter which LAN port you
8