Chapter 2 System Hardware Installation
Please observe the safety information in chapter ¡ § Important Safety Information¡ ¨
Do not expose the server to extreme environmental conditions. Protect it from dust, humidity,
and heat.
Step 2-1: Chassis Removal
Step 1 Push down the two buttons located at two sides of the chassis.
Step 2 And slide toward to remove the top cover.
After removing the top cover, you can install CPU and other essential components.
Step 1
Step 2-2: CPU Installation
Please make sure the CPU type and speed that are supported by the motherboard.
Step 1 To install the CPU(s), lift up the bar that located next to the socket.
Step 2 The noticed corner should point toward the end of lever. The CPU will only it in the orientation
as shown below.
Step 3 Then, align the CPU and insert it into the socket.Then, push the lever to the original position.
Step 1
Hardw are Installation Process
Step 2
Push Toward
11
Step 2