Advertisement
TECHNICAL DATA
Rated voltage
No-load speed
Screw diameter max
Screw lengths
Setting range of depth gauge
Setting range of depth gauge for auto feed attachment
Torque max
Universal reception
Weight - product with autofeed attachment
Weight - product with nose cone
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
Use AEG 18V battery and charger only
WARNING!
Read all safety warnings and all instructions. Failure to follow
or serious injury.
Save all warnings and instructions for future reference.
SCREWDRIVER SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the
operator an electric shock.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy non-
slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
Do not machine any materials that present a danger to health (e.g.,
asbestos).
Switch the device off immediately if the insertion tool stalls! Do not
switch the device on again while the insertion tool is stalled, as
doing so could trigger a sudden recoil with a high reactive force.
Determine why the insertion tool stalled and rectify this, paying
heed to the safety instructions.
The possible causes may be:
it is tilted in the workpiece to be machined
it has pierced through the material to be machined
the power tool is overloaded
SCREWDRIVER
Compatible charger
(not included)
AL1218G
BL1218
BLK1218
BL18DP-X5
Do not reach into the machine while it is running.
The insertion tool may become hot during use.
when changing tools
when setting the device down
Sawdust and splinters must not be removed while the machine is
running.
cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or
by burning them. AEG Distributors offer to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System PCLS chargers for charging System PCLS battery
packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
Do not insert the bit on tool when the tool is running, and switch is
lock on status, the bit will be run and may hurt the user.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
21
BTS18BL
18 V
0 - 5000 min
-1
4.2 mm
25 - 55 mm
± 5 mm
± 3 mm
5 Nm
1/4 "HEX (6.35mm)
1.39 kg
0.97 kg
21
Advertisement
