Table of Contents
Advertisement
PARTS SUBJECT TO WEAR
On a periodic basis check the rubber base for wear, as this is what ensures the stability of the tool. If it should need
replacing, order the spare base from
number of the tool.
On a periodic basis check the wear of both the punch and hexagonal die.
FAULT DIAGNOSIS AND REPAIRS
REPAIRS
To ensure the operational efficiency and safety of the tool, all repair jobs shall be carried out exclusively by
shipping your tool to Cardinal Components Inc
REQUESTING ASSISTANCE
For any information concerning Use, Maintenance, Installation, Repair etc., contac
customer service. When making inquiries, the customer is requested to be absolutely clear and to always refer to
this Manual.
DISMANTLING INSTRUCTIONS
DISMANTLING INSTRUCTIONS
When disposing the tool you need to separate the plastic parts, which are to be disposed of in compliance with
current Regulations.
As for the bulk metal part of the tool, simply split-up the steel parts from those in other metals or alloys and send to
be melted down and recycled.
The oil drained from the tool must not be thrown outdoors but handed over to an authorized oil disposal center.
Request your quote with Rivet Nut USA (a division of Cardinal Components, Inc.)
Cardinal Components is your authorized preferred distributor.
Sales@RivetNutUSA.com
Cardinal Components Inc.,
.
|
(800) 236-3200
customer service indicating the year/serial
t Cardinal Components Inc.,
14
Advertisement
Table of Contents
