Subscribe to Our Youtube Channel
Related Manuals for AirTurn BT500|S
Summary of Contents for AirTurn BT500|S
- Page 1 BT500|S Manual Support for: AirTurn BT500|S-2 AirTurn BT500|S-4 AirTurn BT500|S-6 AirTurn QUAD 500 Revision 1.3...
-
Page 2: Table Of Contents
Contents Before Turning on Your AirTurn BT500S SERIES/QUAD 500 Controls Power Connecting and Pairing Pairing in AirDirect MODE 1 Pairing in MODES 2-6 (Keyboard/Mouse) Pairing in MODE 7 (MIDI) MIDI Mode Open and Closed Pairing Open Pairing Closed Pairing Switching Between Pairing Methods... - Page 3 MODES for BT500S SERIES/QUAD 500 Changing the MODE Virtual Keyboard Control in iOS Power Consumption Recharging the Battery and Battery Safety LED Indications AirTurn Manager Unit Identification Reset to Factory Defaults Care of Your AirTurn Warranty Radio Information Recycling and Disposal...
-
Page 4: Before Turning On Your Airturn
(keyboard) support are compatible. For older PCs you can use Bluetooth 4.1 and higher USB dongles. The dongle must support HID or MIDI if you plan to connect to MIDI. It is recommended to use a WIDI Master USB adapter for MIDI on a PC/MAC if only MIDI is needed. -
Page 5: Bt500S Series/Quad 500 Controls
ONTROLS The BT500S series and QUAD500 use the same controls for all four models, with 2, 4, or 6 footswitches, or four silent pedals. The Function controls are identical across all four models and consist of a Power button, two LED indicators, and a Mode button. -
Page 6: Power
13. OWER ON - Press and hold the Power Button for one second until the LEDs flash. The blue LED will blink about 2 times per second until pairing is started. -
Page 7: Pairing In Airdirect Mode
When the AirTurn is discovered, tap on the selection. A dialog box will then appear. Tap on Pair. Android – Select Settings > Bluetooth, and turn it on if it is off. Make sure your device is set to discoverable, tap the SCAN button. -
Page 8: Pairing In Mode 7 (Midi)
With all devices, ensure Bluetooth is turned on and switch your AirTurn to Mode 7. iOS –Go to the MIDI App you wish to use and find the Bluetooth MIDI connection settings. Select your AirTurn in the list. If requested, tap Pair. -
Page 9: Open And Closed Pairing
Open pairing is the default method. Use Open pairing when you frequently use different devices with your AirTurn. Used Closed pairing when you are in a band and you always want to rely on pairing with the same device. -
Page 10: Closed Pairing
You can easily switch between Open and Closed pairing methods. With your AirTurn powered off, hold down the MODE button and hold the power button to turn on as usual. Both LEDs will flash to confirm – twice for open pairing, three times for closed pairing. -
Page 11: Bt500S-6 Analog Inputs
These can be used to send MIDI, control a mouse cursor, or directly communicate with compatible apps. Most expression pedals will work without modification; other analog pedals or devices such as joysticks can be used when wired to a 1/4” plug according to the diagram below:... - Page 12 The following diagram shows how to create a cable to convert a volume pedal to an expression pedal. The analog ports must be calibrated and programmed via the AirTurn Manager app before use. Be sure to re-calibrate the input when changing analog devices.
-
Page 13: Calibrating Analog Input
Manager App. Connect a BT500S-6 and select Analog Calibration, choose a port, and follow the onscreen instructions. You will be instructed to move your expression pedal to its maximum, then back to its minimum. Once calibrated, the analog inputs must be programmed to send a signal (AirDirect, Mouse,... -
Page 14: Modes For Bt500S Series/Quad 500
BT500S SERIES/QUAD 500 There are seven modes available on your AirTurn. Each mode sends a different signal for each pedal. The AirTurn is set to MODE 2 by default. You can also customize MODES 2-7 with the AirTurn Manager App. (See page 15 for instructions on mode... -
Page 15: Changing The Mode
IRTUAL EYBOARD ONTROL IN I If you are connected to your iPhone or iPad in MODES 2-6, the AirTurn acts as a keyboard and disables the virtual (on-screen) keyboard. To turn on the virtual (on-screen) keyboard in iOS, put the cursor into a text box and press the Power Button. The Bluetooth LED will turn on to signify that the button was pressed. -
Page 16: Power Consumption
A charge will last for about 200 hours. The BT500 series includes several battery safety features to help maintain battery life and health. The battery will stop providing power if it is too low, and stop charging when full. Charging is ° °... -
Page 17: Led Indications
The App allows you to configure the key repeat rate, power-saving settings, select the pairing method, and configure the signals for each of the pedals in each mode. In addition, the analog inputs on the BT500|S-6 may be configured and calibrated. -
Page 18: Unit Identification
AirTurn, and reconnect. It is recommended to check for updates quarterly. DENTIFICATION The unit name in your Bluetooth host consists of several codes to help with support and identifying your specific device. For example: BT500S-6 v3.0.0 ABCD... -
Page 19: Warranty
Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for one year from date of purchase. You may register your device to extend the warranty for another year. warranty.airturn.com... -
Page 20: Radio Information
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 21: Recycling And Disposal
--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. -
Page 22: Battery Information
Charging from a laptop or a computer with a sleep setting is not recommended. A charge will last for about 200 hours, Generally a battery should last 2-5 years. It can be user replaced with the same model battery by opening the case, unplugging and plugging in the new battery. -
Page 23: Trademarks
AirTurn will recycle returned batteries and electronics. Please request an RMA from the support desk: support@AirTurn.com RADEMARKS iPhone, iPod, iOS, iPad are trademarks of Apple, Inc. Android is a trademark of Google, Inc. Powerpoint, Word are trademarks of Microsoft AirTurn, BT500S SERIES, and its respective logos are... - Page 24 Check out other great products from AirTurn including tablet holders, portable tablet stands, and accessories...
- Page 25 888-247-1223...
Need help?
Do you have a question about the BT500|S and is the answer not in the manual?
Questions and answers