1. SOMFY OPTICAL SAFETY EDGE (ROLLIXO RTS) SOMFY ROLLIXO RTS CONTROL PANEL STOP Prog Description Up button Stop button Down button STOP Prog Prog button STOP Prog Prog LED Motor & safety brake LED Safety edge LED Battery LED Photocell LED MOUNTING THE ROLLIXO RTS Remove the Unscrew and...
Page 3
Rollerdor RD20X2SOM Somfy Rollixo Control Box, Edition 2022/1 SAFETY BRAKE WIRING Sto p Safety Edg Sto p Safety Edg Sto p Safety Edg Sto p Safety Edg Sto p Safety Edg Sto p Safety Edg Connect the safety brake into Use the ink provided to connect terminals 5 &...
Page 4
2. MOTOR DIRECTION OF ROTATION SETTING At the same time press and hold the UP & DOWN buttons Press and hold the UP button to check the motor on the control panel until the door moves forward AND direction. If the motor direction is correct, move on backwards, then release the buttons –...
Page 5
Rollerdor RD20X2SOM Somfy Rollixo Control Box, Edition 2022/1 PAIRING THE SOMFY PAIRING THE SOMFY PAIRING THE SOMFY SAFETY EDGE TRANSMITTER PAIRING THE SOMFY 20 mm PAIRING THE SOMFY SAFETY EDGE TRANSMITTER SAFETY EDGE TRANSMITTER SAFETY EDGE TRANSMITTER 20 mm 20 mm...
POSITIONING OF MAGNETS Bring the door down to its final closed/end limit position. If the door lands on floor and stops, go to point. If the door comes to floor and retracts (bounces back) then see check the detail below, this happens because the doors safety edge system has been activated; Q.
Page 7
Rollerdor RD20X2SOM Somfy Rollixo Control Box, Edition 2022/1 20 mm 20 mm 20 mm 20 mm 20 mm 20 mm 20 mm 20 mm DELETING ALL SOMFY REMOTE CONTROLS DELETING ALL SOMFY REMOTE CONTROLS DELETING ALL SOMFY REMOTE CONTROLS 20 mm...
Page 8
LOCKING THE FRONT OF PANEL Press button STOP and PROG on the receiver until all the indicator lights flash. 7.5 safety edge ST OP ST OP Prog Prog If the safety edge is activated when the door is closing, it stops then re-opens s observed to ensure partially.
Rollerdor RD20X2SOM Somfy Rollixo Control Box, Edition 2022/1 OPERATING DIAGNOSTICS The indicator lights on the front of the Rollixo receiver notify the user of the installation’s status. Pictures are for illustration purposes only, connector blocks are not provided and further fittings may be required.
WIRELESS KEY PAD Key pad Changing the main code Main code forgotten and full reset Commissioning (for first use) By default, the main code is 000000 The Digipad must be reset: stored settings cleared, codes and radio 1. Open the Digipad with the key on a new Digipad.
Page 11
10 & 12 Jarrold Way Bowthorpe Employment Area Norwich Norfolk NR5 9JD +44 (0)1603 743215 sales@rollerdor.net www.rollerdor.net Company Registration Number. 10676267 Registered Office Address: Rollerdor Ltd, Bankside 300 Peachman Way, Broadland Business Park, Norwich, Norfolk, United Kingdom, NR7 0LB Edition 2022/1...
Need help?
Do you have a question about the RD20X2SOM and is the answer not in the manual?
Questions and answers