Touch Screen - Set Up - HCL PT-CB-02 Operation, Parts And Safety Manual

Touch Screen - Set Up

Set Up (cont)
The 'Set Up – Select Program' screen is displayed
Select program
Clamp Time
In the 'Set-Up – Program #' screen select 'Set Clamp
Time'
The 'Set-Up – Program # – Clamp Time' screen is
displayed
Select the 'Clamp Time' field. The on-screen keypad
will be displayed
Enter the desired clamp time
Select 'Run #' to use equipment – OR – Select
'Back' to return to the previous screen
w w w.h clfaste ne rs . com
Set Pressure
In the 'Set-Up – Program #' screen select 'Set
Pressure'
The 'Set-Up – Program # - Tool Pressure' screen is
displayed
Select the 'Unit Of Pressure' type:
PSI , Bar or MPa
The 'Supply Pressure' field is advisory and cannot
be set
Select the 'Tool Pressure' field. The on-screen
keypad will be displayed
Enter the desired tool pressure
Select 'Run #' to use equipment – OR – Select
'Back' to return to the previous screen
Set Counters
In the 'Set-Up – Program #' screen select 'Set
Counters'
2.3