Page 1
User Manual Spinners Models: 8903, 8904, 8908 ® REV. 1/31/22 13655 Stowe Dr. Poway, CA 92064 P: (858) 679-1191 F: (858) 726-6005 www.mytee.com...
Page 2
Congratulations on the purchase of your new Spinner® Tile & Grout Cleaning Tool. As technology continues to develop you can work confidently knowing that both Mytee and its employees are equally dedicated to developing with the industry and its advances.
Service Center using Mytee original replacement parts and Grounding Instructions accessories if repairs need to be performed. When and if calling Mytee for support, please have your Model and Serial Number This machine must be grounded. If it should malfunction or available for faster assistance.
Page 5
Important Safety Information 2. Use only as described in this manual. Use only manufacturer’s 18. When cleaning and servicing the machine, local or national recommended attachments. regulations may apply to the safe disposal of liquids which may contain: chemicals, grease, oil, acid, alkalines, or other 3.
2 - Machine Operation Before Using the Spinner 2.2 - Spinner Operation ® ® Make sure that the extractor to be used is capable of pumping out solution at a PSI of at least 500. 2.1 - Connecting to an Extractor or a Truckmount Switch on your extractor’s vacuum(s), pump, and heater (if appli- cable).
3 - Product Maintenance In order to keep the Spinner operating smoothly and reduce the risk of damage and subsequent downtime, Mytee recommends following the maintenance schedule below: Maintenance Item Daily Weekly Check for loose hardware. Clean and inspect hoses.
4 - Troubleshooting Issue Possible Cause Solution Unclog the jet by removing and soaking in a vinegar Clogged jets. and water solution. Scrub with a soft brush. Repeat if necessary. Check for any clogs in the solution line. Run System The spray bar is Problem with solution flow from extractor.