Table of Contents
Advertisement
Once the unit has a
green
only authorised numbers you store can activate the unit. If caller ID is left OFF anyone
phoning the units number can operate the relays.
To turn caller ID on send a text message
To turn caller ID off send a text message
If you do not require authorised users please skip to the next page
To program a number to the caller ID (WHL) list you will need to send a text message
code:
#WHL=NUMBER#
To delete the number send a text message code:
#DEL=NUMBER#
Example
#WHL=07123456789#
Example
#DEL=07123456789#
If the code is accepted the unit will reply "WHL number stored" or "WHL number deleted"
You can only send one number at a time. Please send the message and wait for the
2G/3G/4G Multi Switch to send you back a text acknowledgement "STORED" before you
Furthermore, please ensure that you have credit on your simcard to receive the text
acknowledgment. It may take some time to receive text acknowledgements depending
upon how busy your telephone network is at the time.
For a quick reset and to clear all numbers there is a built in reset function that is triggered
via sending an sms/text message.
#RESET#
The unit will then remove all WHL numbers stored.
Please only do this if you really have to as it will clear all your programmed contact
numbers.
www.gsm-activate.co.uk
How to Program the Multi Function Switch
light it is ready to be used. The unit has a caller ID function so
PLEASE NOTE
How to Use the Multi Function Switch
Stores your mobile number (Maximum 60 users)
Deletes the mobile number.
IMPORTANT - PLEASE READ
try to add any further contact numbers.
Reset Function
- 01273462380 - sales@gsm-activate.co.uk
#ID=ON#
#ID=OFF#
Page 4
Advertisement
Table of Contents
