Table of Contents
Advertisement
INSTRUCTIONS
IMPORTANT- PLEASE READ
Please make sure you disconnect the power when you fit the simcard. Then slide the
simcard into the holder making sure that the clipped corner of the simcard lines up with
the clipped corner of the simcard holder as seen in the image above.
Powering GSM Multi Switch
Connect 240 volts to the input connector as per figure 1. Once power has been applied
the
blue
network LED light will flash once every second. Once a signal has been found the
green
LED will come on and stay on indicating the unit is now ready for use.
Signal Strength
To check the strength of the signal received please send a text message:
#SIGNAL#
The unit will reply back with a score from 1 - 30. The unit must have a score of at least
10 to work effectively. Anything less than 10 will make the unit unreliable.
2G or 3G or 4G
The GSM Gate Opener can work on both 2G, 3G or 4G network depending on which
model you have. You can choose which network the unit will use at the start up using the
following
Dipswitch settings
Dipswitch 1 OFF & Dipswitch 2 OFF = Connects to 2G
Dipswitch 1 OFF & Dipswitch 2 ON = Connects to 3G
Dipswitch 1 ON & Dipswitch 2 ON =
Connects to 4G
Page 3
www.gsm-activate.co.uk
- 01273462380 - sales@gsm-activate.co.uk
Advertisement
Table of Contents
