Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for G.S.M Activate ALARM PRO 20
Summary of Contents for G.S.M Activate ALARM PRO 20
- Page 1 GSM ALARM PRO 20 ZONES MODEL ALARM PRO 20...
- Page 2 Product Information Our 4G GSM Alarm Pro is a standalone alarm system suitable for both indoor and outside usage and can cover a large range from the base station to the sensors. It will alert you using GSM technology by sending a text message and/or a phone call to your mobile phone or land line when the sensors are broken, alerting you to a possible intrusion or fault.
- Page 3 Instructions IMPORTANT- PLEASE READ Please make sure you disconnect the power when you fit the simcard. Then slide the simcard into the holder making sure that the clipped corner of the simcard lines up with the clipped corner of the simcard holder as seen in the image above. Signal Strength To help ensure that you place the unit in a suitable position, you can text the unit to see how much signal strength the detector is receiving by texting the command...
- Page 4 How to Programme the Mobile Number After inserting the simcard into the GSM module, turn the unit on and wait until you see the GREEN LED come on. This indicates that the module has a signal and the unit is ready to be used.
- Page 5 The Sensors The GSM Alarm Pro 20 has the ability to pair up to 20 sensors. These sensors can be programmed with their own unique location code so the end user will know exactly which sensor has been triggered. The sensors and key fobs are easily paired by using the colour touch screen display on the board.
- Page 6 How to turn ON / OFF the Alarm Once you have paired and positioned the sensors and key fobs the alarm is ready to be used. Arm Using Text Message To set the alarm to ON you will need to send the text message #ALARM=ON# This will activate the alarm #ALARM=OFF#...
- Page 7 Activating the Alarm Once the alarm is armed via text or keyfob, the alarm is then ready and sensing all paired beams. When a sensor is broken this will trigger the siren for the pre determined length of time and also send a text message to two pre programmed phone numbers.
- Page 8 Quick Reference For more technical support please browse the FAQ’s on our website www.gsm- activate.co.uk Alternatively email our technical support team at technical@gsm-activate.co.uk and we will do our best to respond to your querry within 24 hours Monday- Friday. 20/07/21 - GD Page 8...
Need help?
Do you have a question about the ALARM PRO 20 and is the answer not in the manual?
Questions and answers